CHAPTER XXXIII.

HON. JOSEPH E. BROWN'S PIKES AND GUNS.

(This chapter, and the succeeding one, were not placed in the chronological order of events, because they would have broken the continuity of personal experiences).

After an appeal to physical force, as the only means of redressing our wrongs, was fully determined upon, we made many important discoveries, chief of which was that we were not prepared for war. This fact had often been impressively and earnestly set forth by our greatest statesmen, Alexander Hamilton Stephens and Benjamin Harvey Hill, who, though reared in different schools of politics, were fully agreed upon this point, and who urged, with all the eloquence of patriotism and profound understanding of existing facts, the importance of delaying the act of seceding from the United States. until we were better prepared for the mighty consequences either beneficial or disastrous. In no way was the wisdom of this advice made more apparent than by our utter want of the appliances of warfare on land and

on sea.

The ordinance of secession having been enacted, Georgia found itself confronted by the scarcity of guns and other munitions of warfare. Hon. Joseph E. Brown, our war Governor, finding it impossible to secure even shot

guns to equip the many regiments eager for the fray, conceived the idea of arming them with pikes; and, undaunted by the Herculean undertaking, put a large force. of the best blacksmiths at the W. & A. R. R. shops to making these primitive weapons. To whose fertile brain belongs the honor of evolving the plan or diagram by which they were to be made, has never been revealed to the writer. The blade of the pike was to be about 16 inches long and 2 inches wide, with a spur of about 3 inches on either side, all of which was to be ground to a sharp edge. The shank was to be about 12 inches long, and arranged to rivet in a staff 6 feet long.

Be

In the memorable year, 1861, J. C. Peck owned a planing mill and general wood-working shop on Decatur Street, Atlanta, Georgia, on the grounds now occupied by the Southern (old Richmond and Danville) R. R. freight depot. There being no machinery at the railroad shops suitable for turning the handles nor grinding the pikes, Mr. Peck contracted to grind and supply with handles the entire number-he thinks ten thousand. fore he finished this work, Governor Brown called a meeting of the mechanics of Atlanta for the purpose of ascertaining if some arrangement could be made for the manufacture of guns for the army. This meeting was adjourned two or three times, and no one seemed willing to undertake the job. At the last meeting a letter was received from the Ordnance Department of the Confederate States, containing a "drawing" of a short heavy rifle to be supplied with a Tripod rest, and an urgent request that the Governor would encourage the making

of twenty-five guns after this pattern, as soon as possible. A liberal premium for the sample was offered by the Confederate Ordnance Department. The barrels were to be thirty inches long with one inch bore, and rifled with three grooves, so as to make one complete revolution in the thirty inches. As no one else would undertake this complicated job, Mr. Peck asked for the "drawing," and announced his willingness to do so. He discovered that it would require iron 3-4 by 4 1-2 or 5 inches to make the barrels, and for this purpose he procured enough Swede iron at a hardware store on Whitehall Street to make thirty barrels. He also discovered that the common Smith bellows would not yield a blast sufficient to secure welding heat on so large a piece, and it was suggested that it could be done at W. & A. R. R. shops; he therefore secured an order from Governor Brown authorizing this important work to be done there under his instruction. An old German smith, whom Mr. Peck found at the shops, rendered him valuable aid in the accomplishment of this portion of the work. As rapidly as the welding was done he had them carried to his shop, and a wood-turner, Mr. W. L. Smith, bored them on a wood-turning lath. This was a difficult job, as the boring bits caught in the irregular hole and broke; finally he devised a sort of rose bit which steadied itself, and he had no further trouble. After successfully accomplishing this portion of the work, Mr. Peck found himself confronted by another difficulty. He had no way of turning iron, but his indomitable will shrank not from. the task, and he threw out a search-light which enabled

him to discern a Savage, who had been superintendent of Pitts & Cook's gin factory, and he engaged him to turn it. Mr. Peck then employed an ingenious blacksmith, who did to his satisfaction all the smith work he wanted. He made his own taps and dies for fitting the breech pieces, putting in the nipples, etc., and forged the hammers, triggers, ramrods, etc. The brass mountings were cast by Gullatte Brothers, who at that time were running a brass foundry. The locks were purchased by Mr. Peck in Macon, but, as already intimated, had to be supplied with new hammers and triggers. As the plan called for the barrels to be rifled with three grooves, and to make one complete revolution in the length of the barrel, there was none in the employ of Mr. Peck who had any idea how it was to be done. Much perplexed he went to Mr. Charles Heinz, the gunsmith on Whitehall Street, who explained the process of rifling done by hand. On this idea Mr. Peck constructed a machine which he attached to a Daniels planer. This was a wood machine, with a bed which traveled backward and forward, similar to the bed of an iron planer-in such a manner that the backward and forward motion of the bed gave, also, a rotary motion to the cutters. By this process each barrel was rifled precisely alike. Mr. Peck had thirty barrels forged, but some of them were defective and would not bore through without breaking, and some were burnt in testing. Only twenty-five of them were finished. He had an abundance of walnut lumber and did not have to contend with any obstacle in making the stocks, but some in clamping them to the barrels. The

plan also showed the usual screw in the extension of the breech pin, and two bands similar to those on the old style musket. Mr. Peck forged iron bands, but with his best effort at finishing them they appeared clumsy. Opportunely he chanced to see a wagon on Pryor Street containing a lot of hardware and other things, among which was a large brass kettle. Thinking he could make bands out of this vessel, he purchased it and cut it up into those indispensable parts of his famous job, but another obstacle to success presented itself to his patient vision. He could find no one to braze the joints. By reference to his "Mechanic's Companion" he learned the art, and brazed the bands in a skillful style. This being done, he gave his finishing touches to the rifles.

The balls were like minie-balls, one inch in diameter, and two and one-fourth inches long, and weighed four ounces. Mr. Peck made only one set of bullet moulds, which run two bullets at the same time, and he thinks he made only six of the tripod rests. They were every lock, stock and barrel-tested by several persons expert in the handling of muskets, rifles, shotguns, etc., among whom he was, Mr. Charles Heinz, still living in Atlanta, and who will vouch for the accuracy of this important item of Confederate history, and the utility of the shot emanating from these wonderful guns. To put it mildly, the effect was almost equal to that of a six-pounder. And the recoil! Well! Wonderful to relate! They must have had infused into their mechanism supernatural or national prescience, and peering through the dim vista. of the future saw the beacon light of a re-united country,