Failure Analysis: A Practical Guide for Manufacturers of Electronic Components and Systems

Лицевая обложка
John Wiley & Sons, 8 мар. 2011 г. - Всего страниц: 344
0 Отзывы
Failure analysis is the preferred method to investigate product orprocess reliability and to ensure optimum performance of electricalcomponents and systems. The physics-of-failure approach is the onlyinternationally accepted solution for continuously improving thereliability of materials, devices and processes. The models havebeen developed from the physical and chemical phenomena that areresponsible for degradation or failure of electronic components andmaterials and now replace popular distribution models for failuremechanisms such as Weibull or lognormal.

Reliability engineers need practical orientation around thecomplex procedures involved in failure analysis. This guide acts asa tool for all advanced techniques, their benefits and vitalaspects of their use in a reliability programme. Using twelvecomplex case studies, the authors explain why failure analysisshould be used with electronic components, when implementation isappropriate and methods for its successful use.

Inside you will find detailed coverage on:

  • a synergistic approach to failure modes and mechanisms, alongwith reliability physics and the failure analysis of materials,emphasizing the vital importance of cooperation between a productdevelopment team involved
  • the reasons why failure analysis is an important tool forimproving yield and reliability by corrective actions
  • the design stage, highlighting the ‘concurrentengineering' approach and DfR (Design for Reliability) 
  • failure analysis during fabrication, covering reliabilitymonitoring, process monitors and package reliability 
  • reliability resting after fabrication, including reliabilityassessment at this stage and corrective actions 
  • a large variety of methods, such as electrical methods, thermalmethods, optical methods, electron microscopy, mechanical methods,X-Ray methods, spectroscopic, acoustical, and laser methods
  • new challenges in reliability testing, such as its use inmicrosystems and nanostructures

This practical yet comprehensive reference is useful formanufacturers and engineers involved in the design, fabrication andtesting of electronic components, devices, ICs and electronicsystems, as well as for users of components in complex systemswanting to discover the roots of the reliability flaws for theirproducts.


Отзывы - Написать отзыв

Не удалось найти ни одного отзыва.


Series Editorys Preface
About the Authors
Failure AnalysisWhy?
Failure AnalysisWhen?
Failure AnalysisHow?
Failure AnalysisWhat?
Case Studies
Авторские права

Другие издания - Просмотреть все

Часто встречающиеся слова и выражения

Об авторе (2011)

Dr. Marius Bazu, National Institute for Research and Development in Microtechnologies, IMT-Bucharest, Bucharest, Romania
Dr. Bazu is currently Head of the Reliability Laboratory and Vice-Chair of the Scientific Council at the National Institute for Microtechnologies, IMT-Bucharest, Romania. More than 50 National research projects on the reliability of electronic components have been co-ordinated by Dr. Bazu. He is a member of the Management Board and Chair of the Reliability Cluster of the Network of Excellence "Design for Micro and Nano Manufacture- PATENT-DfMM". From 1997 until 1999 he was Leader of a European project on a built-in reliability technology, and in 2000 he received the AGIR (General Association of Romanian Engineers) Award for implementing a technology of Building-In Reliability to a Romanian semiconductor company. Dr Bazu is the co-author of four Romanian Patents and has contributed to over 120 scientific papers. Since 1986 he has been Invited Professor for post-graduate courses on Reliability at the University Polytechnic Bucharest. He has presented invited lectures to international conferences held across Europe, including Austria, Romania, and Serbia.

Mr. Titu Bajenescu, Switzerland
Since 1985, Mr Bajenescu has worked as an independent consultant and international expert on engineering management, telecommunications, reliability, quality and safety. He has worked in the reliability, safety and maintainability office of the Ministry of Defence, designing and manufacturing experimental equipment for army research and air defence systems. With Asea Brown Boveri in Switzerland he was involved in the design and manufacture of new industrial equipment for telecommunications. More recently Mr. Bajenescu joined Ascom and as Reliability Manager, contributing to the development of new ITU and IEC standards. He became Quality and Reliability Manager and Product Assurance Manager of Messtechnik und Optoelektronic. Mr. Bajenescu has authored numerous technical books which have been published in English, French, German and Romanian, and has written many papers on modern telecommunications, and quality and reliability engineering and management. He currently speaks on these subjects as a visiting lecturer at universities around Europe.

Библиографические данные